Suzuki Burgman USA Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
512 Posts
Discussion Starter #1
This is my review originally posted for russian-speaking community, so I translated it and want to post here to share with all BUSA members.

Apologize for mistakes, as my English probably not so good :wink Feel free to correct me. Also just a note: I'm living in Moldova, which is small country located between Ukraine and Romania (Dracula land!) in Western Europe. Winters are soft here, with average temperature around -2 Celsius


The solution for scooter owners when you want to ride, but balls getting frozen.



Watching in February Italian scooter drivers, riding with all sort of kind leg covers, I've decided to order also one for me. I've choose Italian manufacturer Tucano Urbano, which has many different leg cover models that are optimized for specific models of scooters and even motorcycles. There is also a leg cover for the passengers, which are sold separately, and attaching to the basic capes pilot. For Burgman 400 models 2006 and younger suitable model is R159.



The store has kindly provided a discount of 12 euros, so I paid 107 euros for termoscud total. It comes in a nice bag which includes following:
1) The cat :grin
2) Termoscud itself
3) Instructions in several languages ​​with pictures
4) Keychain
5) Transparent stickers



Termoscud material is very, very high quality and all product is rock-solid, looks 5 out 5. And here is what the manufacture says:

The original leg cover with PATENTED ANTI-FLAP INFLATABLE SYSTEM (S.G.A.S.): the inflatable chambers on the sides of the cover prevent flapping at high speed.
- Three-layer construction to ensure thermal protection and waterproofing:
- Waterproof heavy Polyamide outer shell and taped seams
- Fully waterproof inner membrane
- Lined interior for extra warmth
- S.G.A.S. anti-flap inflatable system
- Anti-theft system (metal ring) available for models not requiring screw fixing
- Large storage pocket
- Built-in saddle cover
- Reflective edging

So, in my case, I needed a termoscud, instruction, Phillips screwdriver, Burgman 400 L5, two cigarettes and 30 minutes of time. The top part of the termoscud put on the screws of the bike near the glove compartments



Two belts with plastic carbines attaches to the bike plastic near the radiator. You can apply transparent stickers under the straps to reduce paint scratching.



That's the top belt. The belt does not reach the frame, so when I carefully read the instructions I realized that carbine attaches to plastic as well.



And this is the bottom straps under the bike



Once attached all belts should be gently tightened



Thereafter you need to inflate mouth inflated side compartments and voila - you are lovely!

Termoscud keeps quite OK, even by vibration carbines does not fly off or tries to tear.

And a little bit about small features.
Termoscud have another straps, which you need to sit on, if ride at high speed. They also protect termoscud from wind buffering.



There is also a strap that jumps on the shoulders helping termoscud to rise, closing the rider's chest. Don't be afraid, strap is on velcro, so it won't break your neck in case of accident.



Also termoscud has a large pocket (which really is not only for gloves, but winter hat and other small things, or few small bottles of water). There is integrated rear seat cover is stored in this pocket so when you're parking burgie you can pull and keep all the seat dry.



When it is hot - termoscud can be folded and fixed somehow (did not yet figured out how to do this, but there are straps for this). Once I mounted I enjoyed ​​a short test drive at + 5C.

Before going somewhere, put the bike on the central stand and try to move legs from the platforms of the bike on the ground and back. If you do not do this, at the first stop you can fall with the bike on a side.

If you have shoes wide enough, then Burg riding position changes from the chopper-like to vespa-like or legs can be pulled if you do not plan to stop. Move legs quickly from the chopper position to the ground will not work - I cling to the termoscud. I suspect that the play with the lower straps can fix it. I don't have this issue with narrow boots
- Termoscud is really warm. Even though that on a scooter plastic protects the legs from the wind, with termoscud it's much warmer.
- Tested in the city at a speed of 100 km/h - no wind buffering
- Termoscud is covering only fuel tank. Parking break and ignition lock are accessible without issues
- You need to sit down and get off the bike motorcycle way now, throwing leg over seat to not dirty the termoscud interior.
- At speed 50+ km/h wind slightly blows hips. So It's ok for short intown riding, but for longer trips appropriate pants required.
- The first kilometers and traffic lights went sitting vespa-like exercising remove the legs from under the cover. Unusually to do this on a Burgie, but it keeps my bearing :)
- Termoscud just little wider than plastic (because of inflatable chambers), but still have the overall dimensions of the bike (according to a distance between the edges of mirrors)
- Attention. No, ATTENTION of everybody - pedestrians, drivers and passengers. It is something unusual in our land, unlike Italy or France
- Major issue (greetings to Hussein :wink) - all cats are trying to hide under termoscud when bike is parked.

And finally two pictures. On the ground near the logo Tucano Urbano straps that should be used in a rolled forward termoscud.






P.S. Original images were uploaded to image hosting, but I will duplicate them in attachment

UPD1: I'm not sure if Tucano Urbano supports online store, but I know that http://www.urbanrider.co.uk/ UK shop sells them with delivery worldwide.

UPD2: I've asked my friend in Italy to buy me termoscud and send a parcel to Moldova, so I cannot comment on price of delivery for shop.

Thanks for reading,
Alexey
 

Attachments

·
Registered
Joined
·
1,045 Posts
Good review but, I'd like to see a pic of you on the bike with everything in place. Put it on the center stand and get someone to take the shot for you.
 

·
Registered
Joined
·
96 Posts
Thanks for providing such an excellent review!
 

·
Registered
Joined
·
512 Posts
Discussion Starter #7
@Scooter_Maniac
Will do some pics this Saturday
@westnash
I don't see Tucano Urbano stores in US, but I heard that US members were ordering from UK store www.urbanrider.co.uk with delivering to US. Price per site is US$118.22 without shipping, which is really close to Europeans 119 euros

As raincover it's good enough, but when you're moving. I mean if you're riding 50+ km/h without stops - you're legs are dry as termoscud is water resistant. But when you stop - you're moving your shoe on a ground. Also if you're moving too slow in really heavy rain - you will get water from backrest area. Also it's not necessary to use termoscud in summer as raincover, as it's plush linen is really warm.

So, just to summarize - termoscud is good cover from rain / snow / cold, but it doesn't provide you absolute protection on certain conditions - like really heavy rain + stop-go motion, but at least it will provide you as much as possible and it's really better than have nothing or just raingear

P.S. There are also versions for 200/400/650 owners of different years:
http://www.tucanourbano.com/gb/motorcycle-scooter-leg-covers-hand-covers/termoscud.html?brand=1306
 

·
Registered
Joined
·
512 Posts
Discussion Starter #9
@westnash
When termoscud is mounted, it can be used as rain cover, but only for both rider and passenger seat. Screen, mirrors, handlebar will be not protected
 

·
Registered
Joined
·
1,045 Posts
Thanks for the pics. Looks pretty functional.
 
1 - 13 of 13 Posts
Top