Suzuki Burgman USA Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Hi guys and gals, A friend of mine changed the oil on thier bike and round the head of the transmission oil level bolt. After looking for 20 minutes online and not finding the part number to reorder this bolt, we are pulling our hair out. :evil: Can anyone help point me in the right direction to obtain this part number. I check the schematics and found the numbers for transmission oil filler bolt and the transmission oil drain bolt but not the one for transmission level bolt. I have thought about going to the local hardware store for a replacement but I am not sure if this is wise to do. Any help, thoughts, or suggestions are greatly appreciated!!!!! Bike is not rideable until this bolt is replaced. The bike is a 2007 650. Ok guys and gals....let me know. :(
 

·
Premium Member
Joined
·
14,278 Posts
The oil level bolt actually screws into the clutch cover. On the parts fiche look on the one for crankcase covers. It is item 7, part number 09247-12006.
 

·
Registered
Joined
·
16 Posts
Discussion Starter #6
Thank you all for the parts number. :thumbup: Thank you, thank you, thank you! Got parts ordered and place the not too badly rounded bolt back it. Thanks again you guy rock!!!! :cheers:
 

·
Registered
Joined
·
1,536 Posts
bakoburgman said:
Thank you all for the parts number. :thumbup: Thank you, thank you, thank you! Got parts ordered and place the not too badly rounded bolt back it. Thanks again you guy rock!!!! :cheers:
There are various ways around this problem. You could file 2 new flats on the bolt or file a screwdriver slot. :)
 
1 - 7 of 7 Posts
Top