[pja3003]

http://www.ronayers.com/Fiche/TypeI...l/AN650,A/GroupID/362121/Group/STEERING_STEM_

The Number 3 Item wont fit, The number 10 item fits perfectly

09265-30020
BEARING (30X55X17)

I noticed it looks different than the one i pulled out, the new ones i bought is tapered the old one looks like your regular non-sealed type ball bearing with housing.
the inner diameter is off by 1mm the tapered bearing is smaller. what gives?


PS i own a skywave an400x same body as with the an250

 

[Dave_J]

You said you ride a Skywave AN400x. That link for Ron Ayers is for a AN650. I am sure that they are different than a 400's. This is the one you need to look at http://www.ronayers.com/Fiche/TypeID/5/ ... RING_STEM_

 

[pja3003]

the stock non tapered bearing says SAC 3055-1 but measuring the inside shaft its a 32x55x1

the replacement tapered bearing is a 30x55x17 so obviouly it wouldnt fit the steering shaft. anyone had experience replacing their old steering head bearing with newer tapered ones?

 

[pja3003]

The tapered bearing wont seem to fit, i placed the old one in the pic as well for reference

 

[BradleyF5]

Tpapered roller bearings

Hello,friend ,This is my website,It‘s about Bearings.If you hava some advice,please contant me.URL:http://www.hrt-bearings.com/

Thank you.