Suzuki Burgman USA Forum banner
1 - 1 of 1 Posts

1,197 Posts
Unfortunately our new gas blends just doesn't have the shelf life of back in the good-old-days. :( When left setting for very long without additives like Sta-Bil or Seafoam the gas will separate and leave varnish deposits. When fresh gas is added those deposits will turn into a gummy substance. Running the engine will then pull that gunk into places that will get plugged up with those varnish deposits. The mechanics at boat marinas experience that a lot. If you go to the closest boat marina that has a good reputation for knowledgeable mechanics. Ask them what they recommend. Of all the mechanic fields, I believe the marina mechanics have a higher rate of experiencing that problem you're experiencing.

Good Luck
Happy Scøøterïng!

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.