[Terry Kiernan]

I ran into a rock curb and got a lot of scratches on the under carriage, if I take them off and fill the scratches with Bondo and sand them down and spray paint them will they look all right. I think Bondo will stick to fiber glass.
Terry in AZ.

 

[Brian]

If you have any boat dealers near where you live, many carry a video on do-it-yourself fiberglass and gelcoat repair. Much of the material will apply to repairs on the Burgman (and Gold Wings, Corvettes, etc.) as well as to boats -- could help you to get that extra nice job that no one but you will know was ever done.

 

[billmeek]

Depending on the severity of the damage, you might be able to just use touch up paint to hide the damage. I had a couple of fairly deep scratches on the lower right of my Burgman and used a touch up paint to cover them. Since they are low on the bike, they are only noticable if you are closely inspecting the bike.

 

[seatec]

Fiber glass will not bond to the plastic, have to use a filler for plastic car bumpers or some thing like that, I think JB Weld will bond pieces together but have not tried it, I have used Dyna Weld on a lot of Honda scooters to repare them . Wayne

 

[ksmall1998]

Whatever filler material you get be sure that it will adhere to and is compatible with ABS plastic!!!

 

[mactd83]

if its a 650...the panel from ronayers.com is only $140 might be worth saving the labor and cost of bondo and just buy a new panel

 

[Bleeder]

Bodywork for reasonable rates is my spesheeality.

Peace.

 

[philtag6000]

I like to cover scratches with stickers.
Arai/Shoei stickers reflective stickers or whatever
you can find that'll do a good job hiding it.