Suzuki Burgman USA Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,113 Posts
Oil will always "settle" right after a new oil change, and you're never quite sure what's going on with the first one. If you look into the sight glass immediately after stopping the motor, it will always be a bit high. Let it stand for a few minutes and give all of the oil the chance to find its lowest level.

But your real problem is being unable to remove the filter. I can't tell if you live in the States or not, but if so try going into any auto parts store and get a filter wrench - the kind that slips over the top of the filter and lets you use a ratchet to twist it off. They come in many different sizes, so I got mine while getting the replacement filter and simply bought the one which fit.



And if you do need to let a little out, just remove the drain plug for a second or two. Add a little back in if you've let too much out.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top