Suzuki Burgman USA Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2,862 Posts
jskzes said:
I recently noticed that when I move (seated or standing) my bike without it running I hear a slight friction sound coming from my front brake and rotor. Is this normal or does it mean its time for a pad change? The bike only has a lil over 4500 miles on it. Again, it don't sound bad just a slight metal on metal sound.
You can check the breaks by looking under them ,Most of the time you won't here any thing if the breaks are failing or Low ,Most of the time ,I waited a little to long to do mines and had Deep scrapes on the Rotors, No Problem you just need a Flat Palm Sander ,Do both Sides of the Rotors, This is suppose to be done anyway Prior to installing Break Pads,Only if the Surface is uneven.

in some cases, May need Cleaning.

Elliott,
 

·
Registered
Joined
·
2,862 Posts
Make sure!! you Prop it on the right Spot, or the plastic will Co lapse in on it self, it happend to me once, or Twice, :(

Elliott,
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top