Joined
·
10 Posts
Daryl,
I've installed my Autocom Active-7 Smart system and I am rapt. The box itself is under the seat, just adjacent to the toolkit, I've velcroed it in place.
I've run the +ve lead inside the hump to the fused side of the 12v outlet wire (cut back the insulation and soldered the lead to it, then insulation tape over the join) - the advantage of this is the outlet is a) fused (10 amps) and b) is switched on by the ignition).
The -ve lead is wired straight to the battery.
I'm in the process of running the phone and music lines to the glove box where I can velcro down my mobile phone and mini-disc player.
I'll take some photo's and upload them when I can.
Cheers,
Bob
I've installed my Autocom Active-7 Smart system and I am rapt. The box itself is under the seat, just adjacent to the toolkit, I've velcroed it in place.
I've run the +ve lead inside the hump to the fused side of the 12v outlet wire (cut back the insulation and soldered the lead to it, then insulation tape over the join) - the advantage of this is the outlet is a) fused (10 amps) and b) is switched on by the ignition).
The -ve lead is wired straight to the battery.
I'm in the process of running the phone and music lines to the glove box where I can velcro down my mobile phone and mini-disc player.
I'll take some photo's and upload them when I can.
Cheers,
Bob