Suzuki Burgman USA Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
194 Posts
Discussion Starter · #1 ·
HI KIDS,

WAS WONDERING IF ANYONE WOULD BE ABLE TO GIVE ME DETAILED INSTRUCTIONS ON INSTALLING HAND GUARDS ON A BURGMAN 400 , 2003 MODEL, HAVENT ORDERED THEM YET, WANNA SEE IF I CAN DO THIS ALL BY MY SELF :) THANK YOU DIANA
 

·
Registered
Joined
·
73 Posts
installing hand guards...

trust me on this one....if you can swallow with your eyes open, you will
have no problem installing the hand guards....get my meaning.....as
Arnold would say....."no problemo"...

Gib
 

·
Registered
Joined
·
73 Posts
hand guards

Hi Diana....I was just trying to be cute....

the instructions that come with them are fairly good....the spacers go
in-between the guard and the grip.....the end of the guards are kinda
being "sandwiched" between the spacers and the screws that originally
came out of the ends of the handlebars.....if you have a problem, I
can take a pic of mine to show you how they install, but you really
shouldn't have any problem.

Gib
 

·
Registered
Joined
·
194 Posts
Discussion Starter · #5 ·
HI GIB,

:) I THINK I WILL BE FINE TOO, BUT IN CASE , COULD YOU POSSIBLY POP OVER TO NH AND HELP ME ... :wink: DO YOU LIKE YOUR HAND GUARDS? WHAT OTHER ACCESSORIES DO YOU RECOMMEND? THANK YOU FOR YOUR HELP DIANA
 

·
Registered
Joined
·
73 Posts
mods...

Well Diana.....I went kinda nuts.....check out my 400 in the photos
section under "Gibs An400...", I've listed everything I have done there.
Not too much left to do....I plan on going no further with it.

Gib
 

·
Registered
Joined
·
194 Posts
Discussion Starter · #11 ·
HAND GUARDS

HEY GIB !!

I DID IT, THE HAND GUARDS CAME IN TODAY AND I INSTALLED THEM MYSELF!! IF I CAN DO IT ANYONE CAN ...THANK YOU AGAIN FOR THE RON AYERS WEBSITE, I SAVED $$$ TOO........GOT THE BUNGIE THINGY'S TOO, BUT I HAVEN'T INSTALLED THOSE AS YET......DIANA
 

·
Premium Member
Joined
·
267 Posts
Help!

I put the old monster twist while tightening one of the pivot bolts and twisted it off. You know the one that comes with the kit. The one I cannot get replaced as no-one seems to know where to get a replacement of just one bolt other than buying a whole new $104 kit! Anyone have any ideas?
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top