Joined
·
147 Posts
Headlight adjustment
Norb,
I will do my best to explain. First you take the handbar covers off. There is two fastners that hold them on. Push the fastner buttons very carefully they only go in partway then release(reverse,pull out all the way first then push in). As soon as you have 2piece covers off you then work on the underneath panel. I believe there is 5 phillips screws to take of. Then pry the underneath panel off. this will expose the inside and you will see where the two headlight bulbs are on each side. As soon as you find them there is a phillips adjustment headlight screw on each corner. Turn those and you will see headlights raise or lower. Sorry my details aren't as clear as they should be, but this is how I did it.
Good luck,
Helix
Norb,
I will do my best to explain. First you take the handbar covers off. There is two fastners that hold them on. Push the fastner buttons very carefully they only go in partway then release(reverse,pull out all the way first then push in). As soon as you have 2piece covers off you then work on the underneath panel. I believe there is 5 phillips screws to take of. Then pry the underneath panel off. this will expose the inside and you will see where the two headlight bulbs are on each side. As soon as you find them there is a phillips adjustment headlight screw on each corner. Turn those and you will see headlights raise or lower. Sorry my details aren't as clear as they should be, but this is how I did it.
Good luck,
Helix
