[snakehomsi]

Hi guys
Plz any one know.how I can adjust my break lock in my Bergman 650?? Thx
My front and rear breaks is fine..but the break lock is very smooth and it's not locking the breaks..maybe only 10%..
Actually I use it to light a cigarette ..

 

[Buffalo]

You adjust it back at the rear caliper at the nut that attaches the arm to the caliper. It's not hard to do but there is a sequence you must follow. Check LeDude's how to video's and you can probably find one on how to do it.

 

[MJR]

Your basically pulling the park brake handle up one notch (has eight total), loosening the adjustment lock nut on the rear caliper, adjusting the allen keyed stud it until it bottoms out (no pressure on the pads), and tightening the lock nut.

Inspect that the rear wheel is locked up when pulling the brake-lock lever 4 to 6 notches and moving the motorcycle forward to make sure that the brake-lock acts enough.

 

[snakehomsi]

Thx guys....it was really helpful..I did it.