Joined
·
409 Posts
This is an easy one. I have the monokey E52NF. It attaches to the E529 rack for easy on and off.
Eddie
Eddie
Posts by Edwljoseph
1 - 3 of 3 Posts
Joined
·
409 Posts
The E529 rack has three bolts which line up with the predrilled and tapped holes under the top plastic cover. The hole size is 5/8 inch going through the plastic.
It is not hard to do. GIVI's instructions leave a lot to be desired but the pictures are ok and with a little common sense, it is an easy job.
GIVI products are of very good quality.
Eddie
It is not hard to do. GIVI's instructions leave a lot to be desired but the pictures are ok and with a little common sense, it is an easy job.
GIVI products are of very good quality.
Eddie
Joined
·
409 Posts
There is a little trick to taking off the rear upper cover. You have to undo the bottom cover first in order to reach the release pins. If you don't, you will be frustrated or break the plastic. This is for the 650
Eddie
Eddie
1 - 3 of 3 Posts
