Suzuki Burgman USA Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
409 Posts
I put on the E52NF two weeks ago. Directions leave a lot to be desired but looking at the pictures and common sense will overcome. I chose the E52NF because it had the brakelight kit already installed and power was automatically connected when the case was put on the rack.

This is Lonnie's web page for the installation of the backrest. Same format as the E529 rack. A 5/8 inch drill bit is neccessary.

http://www.geocities.com/burgman_scoot/ ... krest.html

There is one mistake on Lonnie's page. You have to take off the rear lower body panel first and then pull the two plugs in order to pull the top cover.

Wiring is easy. Remember, black wire white stripe is the ground, white wire black strip is power for brake light. Ignore gray wire as it is for tail lights.

The case is of excellent quality.

Eddie
 
1 - 1 of 1 Posts
Top