Suzuki Burgman USA Forum banner
1 - 1 of 1 Posts

·
Administrator
Joined
·
22,919 Posts
The 20-04 CVTs have the same size CVT input shafts as the 05 up, but the hollow shaft was larger diameter so they made that STUPID adapter. They should have made the "Polish" style adapter from the beginning and NOT made the change in 05 up.....

The 05 up does not have an adapter that bolts on the CVT. They have an adapter that slides in from the left side of the engine and the long bolt pulls it all tight. There is a gap between the CVT's input and the adapter. The CVT's input goes directly into the smaller diameter hollow shaft.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top