Suzuki Burgman USA Forum banner
1 - 1 of 1 Posts

Premium Member
1,326 Posts
Discussion Starter · #1 ·
One of the worst maintenance tasks on the 650 seems to be removing and replacing the front fender. It must come off to remove the front wheel. There are 2 bolts on the inner side of the fender that must be removed/reinstalled. There is so little room to work in there while the wheel is on that it's a very slow and frustrating task.:confused:

Folks here seem to come up with all sorts of simple solutions, and I'm hoping that there's one for this. I was considering cutting off the nose of the fender, but that might look odd. It's also difficult to see how to raise the front end enough to get the wheel off with the fender in place.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.