Suzuki Burgman USA Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
1,326 Posts
Discussion Starter · #1 ·
I finally got around to mounting my flags on my Kiwi Dave sidecase racks and it turned out pretty well. I used an 18" aluminum rod, threaded it to 1/4-20, placed a cap nut on top, added a rubber washer above and below to maintain the flag's position. The clamps are rubber insulated 1/4" cable clamps. I used the bolt that attaches the sidecase mushroom at the bottom and drilled one hole for a small bolt at the top.


[attachment=2:248kelpf]photo.JPG[/attachment:248kelpf]
[attachment=1:248kelpf]photo2.JPG[/attachment:248kelpf]
[attachment=0:248kelpf]photo3.JPG[/attachment:248kelpf]
 

Attachments

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top