Suzuki Burgman USA Forum banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
1,327 Posts
Discussion Starter #1
I finally got around to mounting my flags on my Kiwi Dave sidecase racks and it turned out pretty well. I used an 18" aluminum rod, threaded it to 1/4-20, placed a cap nut on top, added a rubber washer above and below to maintain the flag's position. The clamps are rubber insulated 1/4" cable clamps. I used the bolt that attaches the sidecase mushroom at the bottom and drilled one hole for a small bolt at the top.


[attachment=2:248kelpf]photo.JPG[/attachment:248kelpf]
[attachment=1:248kelpf]photo2.JPG[/attachment:248kelpf]
[attachment=0:248kelpf]photo3.JPG[/attachment:248kelpf]
 

Attachments

·
Registered
Joined
·
1,664 Posts
paulcbrowne said:
I finally got around to mounting my flags on my Kiwi Dave sidecase racks and it turned out pretty well. I used an 18" aluminum rod, threaded it to 1/4-20, placed a cap nut on top, added a rubber washer above and below to maintain the flag's position. The clamps are rubber insulated 1/4" cable clamps. I used the bolt that attaches the sidecase mushroom at the bottom and drilled one hole for a small bolt at the top.


[attachment=2:2ncigxby]photo.JPG[/attachment:2ncigxby]
[attachment=1:2ncigxby]photo2.JPG[/attachment:2ncigxby]
[attachment=0:2ncigxby]photo3.JPG[/attachment:2ncigxby]
Nice job..........!!! :thumbup: :thumbup:
 

·
Registered
Joined
·
1,664 Posts
If your flag poles are tipped towards the rear, as it looks like..........No need for the rubber washers at all............. :wav:
 
1 - 3 of 3 Posts
Top