Suzuki Burgman USA Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,838 Posts
Discussion Starter #1
2008 AN400
About 200 miles ago, I had a prob with the ISC- code 40 I think.
The idle was up to 2000, then down, then up for a while. Etc.

Checked everything. Calibrated 2 things that are calibrate-able. Disconnected the battery for a while. Then rode it.

After 100 miles or so, it settled down. Which was advice from local dealer.

I guess the ECM gizmo takes some time to "relearn" stuff. :) Might apply to other bikes and vehicles too?
 

·
Registered
Joined
·
1,345 Posts
I had a similar experience. After a trip my 2016 would not hold idle (again). Did the throttle relearn procedure and it seemed to have fixed it.
 

·
Administrator
Joined
·
18,400 Posts
Don't let MikeyM's SWIMBO know of this Reset procedure.
 
  • Like
Reactions: mikeyMarine
1 - 4 of 4 Posts
Top