Suzuki Burgman USA Forum banner
1 - 6 of 6 Posts

Registered
Joined
23 Posts
Discussion Starter · #1 ·
Ok I have used search but not much there regarding later 650Execs.
Went out for a 120 mile ride out yesterday but on the motorway even with a mra vario spolier the buffeting was still noticeable ( im 5 11" ) and that stock screen was flexing like a sheet in the wind 馃槣
So I am going to purchase a Givi screen, any tips on fitting one or a better alternative would be greatly appreciated.
Many thanks
Bigmc
 

Registered
Joined
23 Posts
Discussion Starter · #6 ·
Well being in the UK I actually found it hard to find screens for late 650 Execs.
Yes, I could order them from the States but shipping costs were horrendous !
In the end it came down to just two that I could order from within the UK, a Pyramid Ermax Touring Screen or the Givi.
Given that Dave J said the Givi's were thin I found out that the Ermax was only 3mm thickness and the Givi 4mm so I have ordered the Givi D3104ST in clear , just hope its OK ?
 

Registered
Joined
23 Posts
Discussion Starter · #7 ·
Well the Givi D3104ST screen came today, it is far better quality than the OEM screen and thicker ,the only thing is, I ordered it from branded biker here in the UK ( very good ) but no fitting instructions came with it.
Not had chance to try it out yet as it has been wet and very windy here in Devon today.
Simple enough job but as most of you probably know, if fitting one reconnect the two screws behind the screen first then snap the screen cover in place otherwise you will break a flimsy plastic tab like I did !!
Anyway 拢29 delivered so not going to break the bank,so glad its not a BMW scooter..phew !!
 

Registered
Joined
23 Posts
Discussion Starter · #8 ·
New screen cover came today ( PN 94641-26J50- 000 ) and to save the wrath of SWMBO I took extra care when fitting it.
Ignore my post above, just carefully push upwards and get the flimsy tabs snapped in place first, then attempt the simple yet most difficult job of getting those two darn screws in !
Also its worth knowing that the raised silver Suzuki emblem ( PN 68641-260-J00 ) is a staggering 拢19 here in the UK and does not come with the new surround ! So very carefully remove your old one, its just a stick on emblem which makes Suzuki's price even harder to stomach.
 

Registered
Joined
23 Posts
Discussion Starter · #10 ·
Hi Blacktruck, Yes I have had the chance to ride with it and I really like it over the OEM screen.
Its 12cm taller I believe and wider but I think because
I also have a MRA type A spoiler fitted it helps tremendously.
Unfortunately I am in the UK so replacement screens had a very narrow choice what with Brexit and this covid malarkey, a member on here offered to ship the workshop manual to the UK but the cheapest quote he could get was from the USPS and it was $80 dollars !! God knows what a windscreen would cost ? ?
But yes one again, I really like it.
 
1 - 6 of 6 Posts
Top