Suzuki Burgman USA Forum banner
1 - 1 of 1 Posts

· Registered
793 Posts
I'm going to install a 12v piezo buzzer across the two terminals of the flasher module. They're a few bucks at an electronics parts store.
Get one that has internal oscillator circuitry, not the plane peizo discs.

Mounting foam works good to get it placed next to or on a flasher module.

The rider energizes the turn signal flasher by left or right switch position.
Piezo beeps every time the lights are off during flashing.

Regulate beep volume by placing tape partially or entirely over the peizo output air hole or disc edge.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.