Suzuki Burgman USA Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Please lord make us a definitive replacement video to solve this pain in the butt task
2012 and later (harder)
2013 and newer (somewhat easier)
 

·
Super Moderator
Joined
·
15,589 Posts
Eh Ledude covers the tupperware removal ya need, & once you're there it's pretty straight forward.
It'd kind of a PITA but really only in terms of how much you need to remove to get to that bottom bolt, not really in terms of any major skill. As I noted elsewhere you don't really need to fully remove the side piece, just let it flop back and don't yank on it while you're doing that and there's plenty of room. Save ya a bit of messing around.
 
  • Like
Reactions: DarisPakar

·
Registered
Joined
·
4 Posts
Discussion Starter · #4 ·
Just to clarify. The project as based on the removal of the storage well vs. the removal of the right rear body panel?

I tried the mentioned video and without audio guidance was not able to expose enough room to even locate the bottom release pin. Will give it another try.

My issue began after adding a simple back rest for the driver. The added weight over whelmed the weaken strut.

Thank you.
 
1 - 4 of 4 Posts
Top