Suzuki Burgman USA Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
Anyone know a brand or part number of gas strut strong enough to hold up corbin seat. Stock one not strong enough
 

·
Registered
Joined
·
3,933 Posts
Model and year of the Burgman would certainly help get you the right answer.
Different struts for different Scoots. Mine uses the Mustang hood strut. ;)
 

·
Premium Member
Joined
·
647 Posts
Try This site http://www.Liftsupportsdepot.com has a bunch

You will need to pick the right end and the right length

From the thread below - this is an example
http://www.liftsupportsdepot.com/avm-4421-w-hood.html
another is
"Mighty Lift E95054 from Auto Zone is WAY, WAY, WAY more than the stock lift strut. It fits perfectly, but the seat is way cocked when it's closed."

But on the corbin that may not be an issue


This the thread that talks about many options - i would start there

http://burgmanusa.com/forums/52-burgman-400-2007-model/41426-easy-order-seat-strut.html

Good luck
 
1 - 4 of 4 Posts
Top