[BurgDanno]

How the hell do you do anything with these valve stems?! I asked for 90degree stems, but they didn't do it, these are even longer than the originals! I can't get my tire gauge in there!

 

[BurgDanno]

I got Dunlop ScootSmarts...

 

[BurgDanno]

Maybe I'll ride over there and ask the service guy to check my tires, then show him the text where I asked for 90 degree stems.

 

[BurgDanno]

Keep the tried and tested TR412, and get yourself one of these: Tire Chuck with Lock-On Lever
View attachment 99341

I have one of those, hate the **** thing. I'll try to get all the clips that get in the way and see if I can use it, but still don't have a pressure gauge to get in there...

Was looking at this...
Digital Tire Inflator

 

[BurgDanno]

The hardest part is getting up off the floor.

That would be my biggest problem...🤦‍♂️

 

[BurgDanno]

the motion pro chucks and gauges have swivel heads and dont leak.....they make the process easy.. pricey yes but like carhartt work clothes buyem once...

Yes, those look nice, I'm going to try to get to the dealer some "cool" morning and challenge him to check the air and show him the text where I asked for 90degree valve stems and see what he says.

 

[BurgDanno]

Should be able to find 45 degree tire gauge.

I have one, can't get in there, it would be good if it was a "reverse" 45...

 

[BurgDanno]

So...I got this at Harbor Freight, solves my problem for now. Tires were a little over-inflated, but they were warm after a ride this morning. Think I'll order those nice angled stems, though for future use.

 

[BurgDanno]

These are what I think I will get, will they fit? Then I'll have them if I need them.
2 Black Ariete Bridgeport 90/83 degree 8.3mm angled valve stems Made in Italy | eBay

 

[BurgDanno]

Thanks, I was looking for that link, But couldn't find it?

 

[BurgDanno]

So, has anyone compared the Kurvygirl ones to the ebay ones that are 1/3 the price?

 

[BurgDanno]

Got these from ebay, I guess the 11.3mm is the length of the stem? They look just like the kurvygirl ones...

 

[BurgDanno]

 

[BurgDanno]

Thanks, WS...I think I have the right ones, the shoulder of the rubber "gasket" measures 11.3mm+, so should work.

mikey,
These have a little "lift"/angle too. I have no way to accurately measure the angle, they say 90degree, but it's less than that.

2PCS Motorcycle CNC Aluminum 11.3mm Tire Wheel Stem Valve 90 Degree Angled NEW | eBay