[maccecht]

As the members say you can't lower it without changing shocks which is not a good idea. You can push yourself further back on the seat as already noted by raising the butt pad which many agree makes a more comfortable ride. You can buy a riser or make your own for a few dollars and a bit of needlework.

Search results for query: Diy backrest riser

www.burgmanusa.com

 

[maccecht]

Wow, good info guys,,,,Can you help me address the No low beam issue, high beams great and all fuses intact, is this an issue at the switch?

Pull the 3 pin connector of the back and check it they have been known to melt and cause issues and do the basics check the bulb all you need is 2 lengths of wire and use your bike battery. Negative can be put on the helmet hook as its attached to the frame just need to access the positive and this can be done on the solenoid feed

 

[maccecht]

Being that the high beam is working and its all one bulb, what would cause the low beam not to? Id be suprsed if BOTH bulbs were bad

You got to start somewhere. There are no fortune tellers on here just guessers based on the OP,s description.