Suzuki Burgman USA Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi

Please let be know what the torque setting for a 2001 burgman 400 k2 modle is. The big nut which holds the rear wheel on the splines

regards Dave
 

·
Registered
Joined
·
3,933 Posts
I believe it is the same as the 2003 which is 87 ft/lbs.
 

·
Registered
Joined
·
48 Posts
87 ft/lbs is what it is on the K7 also.

87 ft/lbs seems like a lot, but it's not really when you get it in your brain that it needs to be wicked tight. When using a proper torque wrench it's actually pretty easy to get to that amount of tourqe, just don't get a big long 2 ft breaker bar and stand on it, that's just way way way too much.
 

·
Premium Member
Joined
·
4,516 Posts
3 nuts hold the wheel to the hub...
1 BIG nut holds hub to axle on my
2005....maybe he describes same thing.
 

·
Premium Member
Joined
·
4,516 Posts
but an440 ´till k2 have no the 3 nuts... just one in the center

i think

OK...thanks...I learn something new.
 
1 - 10 of 10 Posts
Top