Suzuki Burgman USA Forum banner
1 - 1 of 4 Posts

· Registered
41 Posts
I just installed a third brake light on my AN650. From memory the coding at the brake light socket is as follows:

Black wire w/white stripe - ground/- (this wire is on the side of the socket)
White wire w/black stripe - brake/+ (this is 1 of the wires in the nmiddle of the socket)

Good luck.

1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.