Suzuki Burgman USA Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,663 Posts
Duster said:
The pan-head sheet-metal screws that are screwed into the side of the tubes
near the end of the tubes ARE the 'stop' screws that need to come out.
Those 2 screws are the ONLY screws that you need to remove.
Once removed, hold the release lever that you use to slide the butt-stop
in & out, & slide the whole butt-stop assembly completely out of the seat.
I agree 100% I got a 2 Bothers seat back and had the same problem....UNTIL I found those itty bitty tiny teensy weensy small screws in the the 2 slider tubes......!!!!! :cheers: :cheers:
 

·
Registered
Joined
·
1,663 Posts
feebleknievel said:
WOW FEEL LIKE A CLUTS.found the screws had to use some pb blaster but there removed n backrest is gone ..thanks for your help Jim it's appreciated
YUP...............They are a b i t c h to find...........!!!!!!!!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top