Suzuki Burgman USA Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
Took the speedo assy. out of the 650 burg. and tore into the covers. To my surprise everything is led soldered to the mother board. There is about 8-10 small led that are red that shines up the edge of the plastic front. No bulbs in this baby at all. Guess I'll get used to the red background. These led's are about 1/8" x 1/8" and are not interchangeable. To small to unsolder.
 

·
Registered
Joined
·
3,933 Posts
Actually Mitch did replace them on his 400 which are very similar.
He did his with different colored led's to enhance the visibility and look.
Tweezers and a steady hand are necessary! :thumbup:
 

·
Registered
Joined
·
2,838 Posts
Indeed it takes awhile to do but Mitch and I have both done this before with success. Not a hard job to do just tedious and have to be mindful of polarity when desoldering the originals.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #5
Where did you find the led replacements to solder in?
 

·
Registered
Joined
·
3,973 Posts
1 - 6 of 6 Posts
Top